-
Hint: Use a descriptive title for your new message
If you're looking for help and want to draw people in who can assist you, use a descriptive subject title when posting your message. In other words, "I need help with my SUV" could be about anything and can easily be overlooked by people who can help. However, "I need help with my transmission" will draw interest from people who can help with a transmission specific issue. Be as descriptive as you can. Please also post in the appropriate forum. The "Lounge" is for introducing yourself. If you need help with your leather interior, please post in the Interior section - and so on... This message can be closed by clicking the X in the top right corner. -
2021 Telluride SX right side mirror works fine, the plastic cover cracked what is the OEM part number I need to purchase to replace cover?
- Thread author Jza
- Start date
Sal Collaziano
Staff member
Thanks for the link. Which part do I need? The mirror is all functioning only the plastic ring around the mirror is cracked it is connected with other parts. Please advise which number in the link parts I need to purchase.
Thank you,
Thank you,
______________________________
Wouldn’t it be that right mirror assembly with all the bells and whistles for $592.74 plus tax and shipping and labor if you don’t plan to DIY? The good news is that you appear to have the painted cover in reusable shape.
Yes everything is working fine, I have the pieces that cracked off from the front of the cover. However, to replace the cracked cover of the mirror seems like you need to remove the inside door panel. Now whom can you trust to do this carefully and not break anything else or by mistake leave out a screw or two when placing everything back?
Can anyone suggest a place that can epoxy glue back the pieces, or use a 3D printer to fill the gap?
Can anyone suggest a place that can epoxy glue back the pieces, or use a 3D printer to fill the gap?
In my opinion, removing a door panel on a modern car with out breaking 5 cent clips should be a trivial task for a reputable repair shop. I would have no problem doing it myself as most new cars make it easily to repair all the electronics. To make a 3d print they would likely have to take off the mirror to scan in, at that point it will cost you more than just putting in the replacement part.
This person said it was easily done to install puddle lights:
tellurideforum.org
This person said it was easily done to install puddle lights:
Hardwired Puddle Lights
Although I completed this project over a year ago I figured I would share some photos and some details of the project. One thing to know about me is that I like lighting and tinkering with it. Three things I found lacking on the Telluride is the lack of rear fog, footwell and of course the topic...
tellurideforum.org
______________________________
Thank you for your insight. Where can I find a reputable repair shop in the NYC metro area? My past experience with repair shops wasn't honorable.In my opinion, removing a door panel on a modern car with out breaking 5 cent clips should be a trivial task for a reputable repair shop. I would have no problem doing it myself as most new cars make it easily to repair all the electronics. To make a 3d print they would likely have to take off the mirror to scan in, at that point it will cost you more than just putting in the replacement part.
This person said it was easily done to install puddle lights:
Hardwired Puddle Lights
Although I completed this project over a year ago I figured I would share some photos and some details of the project. One thing to know about me is that I like lighting and tinkering with it. Three things I found lacking on the Telluride is the lack of rear fog, footwell and of course the topic...
