Aftermarket Interior Lighting Kit Installation

[dugnichols]

I purchased an aftermarket interior light kit that has four strips, one for each footwell. I'm researching/exploring how to best place the wiring in the car. The placement of the led strips seems pretty straightforward, and I'll be able to tuck wires under the plastic where it meets the carpet along the trans tunnel / center console, but I'm wondering if anyone's already figured out how to get a source wire neatly tucked. Either:

- get through firewall to the fusebox
or
- get into the center console area

I've done searching in the forum and haven't turned anything up yet...

 

[Tellthemride]

Did you see these two threads?

Custom Footwell Lighting Integration with Dome Lights

DIY Footwell lights for $7 bucks...

There is a fuse panel by your left knee kick panel too if you don’t wanna tap beyond the firewall.

 

[dugnichols]

Did you see these two threads?

Custom Footwell Lighting Integration with Dome Lights

DIY Footwell lights for $7 bucks...

There is a fuse panel by your left knee kick panel too if you don’t wanna tap beyond the firewall.

OH sweet! No, I didn't find those in my searches. Thank you so much. And for the fuse info in kick panel!