fizzman911
New member
- Joined
- Aug 15, 2021
- Messages
- 4
- Reaction score
- 1
- Points
- 3
Hello everyone, I am new here. I have a 2020 telluride S that I bought last year. I am very happy with it except I don’t like the remote start in the app. Especially now that the free trail expired. So I purchased the accessoride remote start and installed it today. After programming it today I realized that when I put the car in reverse I get a alert in the dash that says “parking sensor error or blockage” and the car beeps.
the car has no other issues. I assume that maybe the plug and play harness might have an issue. Does anyone have the wiring diagram for the three wire harness connectors on the passenger side behind the glove compartment and the diagram for the one in the fuse box on the drivers side in the cabin. I have a picture of the one I’m pointing. I had to unplug these in order to make the connections. I’d like to see if I can find what wires are for the back up sensors and maybe I just need to wiggle them or a pin was bent. I have attached some pictures. I think some
Of the manuals might have what each pin in the connector goes to.
Thank you guys for the help!
the car has no other issues. I assume that maybe the plug and play harness might have an issue. Does anyone have the wiring diagram for the three wire harness connectors on the passenger side behind the glove compartment and the diagram for the one in the fuse box on the drivers side in the cabin. I have a picture of the one I’m pointing. I had to unplug these in order to make the connections. I’d like to see if I can find what wires are for the back up sensors and maybe I just need to wiggle them or a pin was bent. I have attached some pictures. I think some
Of the manuals might have what each pin in the connector goes to.
Thank you guys for the help!