rwhite4573
Active member
- Joined
- Jul 4, 2019
- Messages
- 305
- Reaction score
- 205
- Points
- 43
11 proximity modules and 1IGS module. Anybody else missing.
soNburst
kramerica72
BRNXBMR
rwhite4573
8VSB
TxAggie Maybe ?
lightbulb2688 +ISG
Lazer
ActionJackson
Kevyn
BigSexy
You can remove maybe from mine, I'm in.11 proximity modules and 1IGS module. Anybody else missing.
soNburst
kramerica72
BRNXBMR
rwhite4573
8VSB
TxAggie Maybe ?
lightbulb2688 +ISG
Lazer
ActionJackson
Kevyn
BigSexy
bogie,Questions on the IGS module...
Does anyone have this installed? Can you share the instructions?
Think it's possible to piggy-back this module onto the accessorides remote start harness the way the proximity module was able to be? (maybe the same connections?)
If I can get answers to these - I might be interested in the IGS module (already have the proximity, missing out on the group buy discount).
TIA
@Lith_SXPNIf anyone is looking to install the ISG/Auto Hold module, here are the pin outs. The module is untested(by me) and pin out does not guarantee the module will work.
Location of the connectors. You need F51, and F52
View attachment 13633
F51 Connector
Pin 4 - Auto Hold
Pin 8 - ISG Switch Signal
Pin 10 - ISG Switch Indicator (Not used for resistor mod or EZLED Module)
Pin 24 - Ground
View attachment 13634
F52 Connector
Pin 3 - 12v Acc
View attachment 13635
Don't we have a 12v cig outlet in the trunk area? I would assume that would be the easiest wire to tap into. Or third row usb outlet would be next closest. I wouldn't be brave enough to tap into reverse camera.@Lith_SXPN
Unrelated to this thread - do you have any thoughts on where I could access an ignition-on wire near the rear of the vehicle - looking to replace the running light wire in my 4-pin with an ignition-on source to always have running lights on my hitch light or when a trailer is connector and hoping not to have to run a wire from the engine compartment to the rear... (Sorry for the hijack)
bogie,
Put me down for the ISG module only...(already have the proximity). The ISG is $67 - they offering any discount on these? Guessing not since only 2 are being ordered... but since there won't be any shipping charges from them..., just that from you to me, still less than ordering directly...bogie,
I was trying to get 20 units, for the $80 price plus shipping. Right now we are at the $87 price. Regular price is $99 plus $25 shipping.
Is everyone ok with a cut off date of 4-5-20 ? That would give us a week to get this done.
Please let me know what you think.
Rick
The bigger the discount the better. I'll wait as long as necessary.bogie,
I was trying to get 20 units, for the $80 price plus shipping within the US. Right now we are at the $87 price. Regular price is $99 plus $25 shipping.
Everyone ok with a cut off date of 4-5-20? That would give us a week to get this done.
Please let me know what you think.
Rick
Same here...no rush.No worries, take your time
Put me down for the ISG module only...(already have the proximity). The ISG is $67 - they offering any discount on these? Guessing not since only 2 are being ordered... but since there won't be any shipping charges from them..., just that from you to me, still less than ordering directly...
I'm good with 4/5 cut-off...
Perhaps start a new thread with the title "Group Buy - Shark Racing Proximity Smart Door Lock Module" with a quick description of the module (screen shot of SR website page?) in the original post; including the goal of 20% off, and a reference to this thread for more info and to reply if interested. Then immediately send a PM to 'Telluride Forum' (administrator) asking him to lock the thread so no replies allowed there - or, maybe PM him first... Just a thought...
bogie,Put me down for the ISG module only...(already have the proximity). The ISG is $67 - they offering any discount on these? Guessing not since only 2 are being ordered... but since there won't be any shipping charges from them..., just that from you to me, still less than ordering directly...
I'm good with 4/5 cut-off...
Perhaps start a new thread with the title "Group Buy - Shark Racing Proximity Smart Door Lock Module" with a quick description of the module (screen shot of SR website page?) in the original post; including the goal of 20% off, and a reference to this thread for more info and to reply if interested. Then immediately send a PM to 'Telluride Forum' (administrator) asking him to lock the thread so no replies allowed there - or, maybe PM him first... Just a thought...
bogie,
I will ask for a discount on the ISG when we get ready to purchase.
Thanks, I will try a group buy thread
13 proximity modules and 2 ISG module.
bogie ISG module only
soNburst
kramerica72
BRNXBMR
rwhite4573
8VSB
TxAggie
lightbulb2688 + ISG
Lazer
ActionJackson
Kevyn
BigSexy
- GreekWiz
- @hamride
Add @adeokesola to the Calgary/Canada group please.
@T_ride with us pushing it back to April, will tat work for you?
I think it would be best for the Canadian guys to pay you directly, and I will pay the full charge of the shipping to me, and I will distribute from here, and they can split the shipping cost with me. @hamride can decide if he would like me to ship to him to save some money, or have it shipped direct to him in Montreal if that works?
Bogie I posted new thread.Put me down for the ISG module only...(already have the proximity). The ISG is $67 - they offering any discount on these? Guessing not since only 2 are being ordered... but since there won't be any shipping charges from them..., just that from you to me, still less than ordering directly...
I'm good with 4/5 cut-off...
Perhaps start a new thread with the title "Group Buy - Shark Racing Proximity Smart Door Lock Module" with a quick description of the module (screen shot of SR website page?) in the original post; including the goal of 20% off, and a reference to this thread for more info and to reply if interested. Then immediately send a PM to 'Telluride Forum' (administrator) asking him to lock the thread so no replies allowed there - or, maybe PM him first... Just a thought...
GreekWiz,Please add @T_ride, as long as it's going to be in April, closer to middle would be best, not sure when cutoff is?