OBD Fuse

[Dallas1]

So I just got my windshield replaced on my 2022 Kia Telluride EX, but the tech said they couldn’t calibrate it because the OBD port wasn’t working. I verified it was in fact “dead”, and began looking for info regarding which fuse the OBD port is connected to, hoping it was just a blown fuse. To my astonishment, not only does the owner’s manual not provide this info, neither the phrase “OBD” nor “On-Board Diagnostics” (with or without the hyphen) is mentioned a single time in the entire owner’s manual.

So with that being said, does anyone know which fuse the OBD port uses in a 2022 Telluride? I would very much like to avoid a multi-hour ordeal with a Kia dealership.

 

[Senator20]

So I just got my windshield replaced on my 2022 Kia Telluride EX, but the tech said they couldn’t calibrate it because the OBD port wasn’t working. I verified it was in fact “dead”, and began looking for info regarding which fuse the OBD port is connected to, hoping it was just a blown fuse. To my astonishment, not only does the owner’s manual not provide this info, neither the phrase “OBD” nor “On-Board Diagnostics” (with or without the hyphen) is mentioned a single time in the entire owner’s manual.

So with that being said, does anyone know which fuse the OBD port uses in a 2022 Telluride? I would very much like to avoid a multi-hour ordeal with a Kia dealership.

How did you verify it was not working? Was the car on but not started? Or was the car off?

 

[ksyrah]

So I just got my windshield replaced on my 2022 Kia Telluride EX, but the tech said they couldn’t calibrate it because the OBD port wasn’t working. I verified it was in fact “dead”, and began looking for info regarding which fuse the OBD port is connected to, hoping it was just a blown fuse. To my astonishment, not only does the owner’s manual not provide this info, neither the phrase “OBD” nor “On-Board Diagnostics” (with or without the hyphen) is mentioned a single time in the entire owner’s manual.

So with that being said, does anyone know which fuse the OBD port uses in a 2022 Telluride? I would very much like to avoid a multi-hour ordeal with a Kia dealership.

Just my $0.02. Pop the covers of both of the fuse boxes and see if you can see a blown fuse. ODB tend to be lower amperages.....

 

[Dallas1]

How did you verify it was not working? Was the car on but not started? Or was the car off?

When I arrived, the Safelite tech connected his OBD scanner with the vehicle turned on and running: nothing.

Just to confirm it wasn’t a bad scanner, I connected my OBD scanner with the vehicle on/running, on/not running, and off completely: also nothing.

______________________________

 

[Dallas1]

Just my $0.02. Pop the covers of both of the fuse boxes and see if you can see a blown fuse. ODB tend to be lower amperages.....

Thanks, this is what I ended up doing (err, well, starting to do). If it does end up being a blown fuse, I’ll let y’all know which fuse it is when I confirm. In the meantime, if anyone sees this and already knows which fuse it is, please chime in and I’ll officially acknowledge you as a better “know-it-all” than myself (Kinda like being faster than the slow kid…not worth much, but it‘s something…)

 

[G-293934]

Did you ever find out where the fuse was? I’m having the same issue.

 

[G-504884]

Was this ever resolved, I checked all fuses on mines and they were good