• Hint: Use a descriptive title for your new message
    If you're looking for help and want to draw people in who can assist you, use a descriptive subject title when posting your message. In other words, "I need help with my SUV" could be about anything and can easily be overlooked by people who can help. However, "I need help with my transmission" will draw interest from people who can help with a transmission specific issue. Be as descriptive as you can. Please also post in the appropriate forum. The "Lounge" is for introducing yourself. If you need help with your leather interior, please post in the Interior section - and so on... This message can be closed by clicking the X in the top right corner.
  • Car enthusiast? Join us on Cars Connected! iOS | Android | Desktop

Painting the SXPrestige wheels

Bluefire

New member
Joined
Apr 27, 2023
Messages
6
Reaction score
2
Points
3
Having just bought a 2023 SXPrestige (and not the xPro or X line that I really wanted, but the dealer was marking up those versions well over MSRP), I experimented with painting the bare metal parts of the stock black wheels. I simply brush hand painted, free form (no masking), using flat black oil based enamel paint (it’s what I had around the house). Still need to do a second coat, and I need to clean up some over-brush areas, (paint still wet in photo) but it didn’t turn out too bad. Yes, it’s a bit hillbilly, I suppose. Could have Plastidipped them, but I was too lazy (and cheap) to do the masking and all. I like the contrast between the glossy wheel and my flat black painted areas. Also did the front Kia emblem the same. It’s not Xline/XPro, but half a loaf is better than none.IMG_3565.jpegIMG_3620.jpegIMG_3621.jpegIMG_3623.jpeg
 
So you painted a smooth metal surface that gets a lot of wear with paint and no prep? I suppose if you want to get a temporary idea (and that's what you will get) it's a way. Just don't expect anything long lasting once the paint hardens. I wouldn't waste any more time on a second coat either. Plast dip work because it retains that flexibility and grip. Once the paint hardens, it chip city. But yes, you haven't spent anything also
 
Exactly. I don’t expect anything permanent out of it. And it’s easy to remove with enamel thinner if it starts to look bad. Idle hands, and all.
 
Also it’s next to, you know, brakes. I use my brakes all the time - to stop my vehicle. My concern would be this flakes off and gets in the brakes. Just overall feel like wheels are important enough you should reconsider messing with them in this way.
______________________________
 
Last edited:
Also it’s next to, you know, brakes. I use my brakes all the time - to stop my vehicle. My concern would be this flakes off and gets in the brakes. Just overall feel like wheels are important enough you should reconsider messing with them in this way.
That is of no concern. Any flaking paint, even if it somehow migrated inwards towards your brake disk, would not affect your braking. Your brakes get wet in the rain, and they still work. Geometry and physics. Non issue.
 




Back
Top