Aftermarket badge for Telluride?

[Tim-in-CA]

Yes, just waiting on a manufacturer to make them happen. However, nobody is even working on this as of yet... It'll be a while, unfortunately...

Great. I’d rather buy from you to help support your efforts on the forum.

 

[Sal Collaziano]

Great. I’d rather buy from you to help support your efforts on the forum.

Thank you, I appreciate it very much.

 

[Gwyn]

Thank you, I appreciate it very much.

Is there plans to get the K with 2 lines on the top? Like this with out the stinger of course.

https://i0.wp.com/stingerforum.org/...intage-k-emblem-badge-5.jpg?fit=800,689&ssl=1

 

[Sal Collaziano]

Is there plans to get the K with 2 lines on the top? Like this with out the stinger of course.

https://i0.wp.com/stingerforum.org/kia-stinger-magazine/wp-content/uploads/2018/07/kia-stinger-round-vintage-k-emblem-badge-5.jpg?fit=800,689&ssl=1

Yes, Gwyn. This is probably, actually closer to production than one we were previously talking about above. Still, we're probably looking at 2-3 months before anything is available.

They will most likely be available as "metal skins", like these: KIA Telluride Metal Skin Rebadge Set - Kia Telluride Store

______________________________

 

[westcoastTelly]

Sal are you using the same font as Telluride to design the T logo ??

 

[Sal Collaziano]

Sal are you using the same font as Telluride to design the T logo ??

I'm not having anything designed myself - but this "T" is on the way in various iterations...

 

[MELISSAB]

What are those letters down the middle or are they just squigglies that look like letters?

 

[westcoastTelly]

Thanks Sal , is this a skin or a badge ? I know that the front emblem is VERY difficult to remove , I had to use a hole saw to remove mine from the Sorento because of the pins and the grill placement

______________________________

 

[westcoastTelly]

What are those letters down the middle or are they just squigglies that look like letters?

LODEN , its an emblem company

 

[Sal Collaziano]

Thanks Sal , is this a skin or a badge ? I know that the front emblem is VERY difficult to remove , I had to use a hole saw to remove mine from the Sorento because of the pins and the grill placement

These are badges. The only metal skins available are the Carbon K's I have in the forum store...

 

[westcoastTelly]

These are badges. The only metal skins available are the Carbon K's I have in the forum store...

Will the "wings" fit in the recessed spot on the grill ? check out a Sorento to see if it fits ??

 

[Sal Collaziano]

Will the "wings" fit in the recessed spot on the grill ? check out a Sorento to see if it fits ??

I'm not sure yet but I'll get these to somebody local for testing when they're available...

______________________________

 

[Razorback]

I'm not sure yet but I'll get these to somebody local for testing when they're available...

I would love to see a T in the shape of a axe pick like the one in the Telluride Colorado website. I was trying to draw in up today but did not get time.

 

[westcoastTelly]

I would love to see a T in the shape of a axe pick like the one in the Telluride Colorado website. I was trying to draw in up today but did not get time.

thats great , keep us posted . Sal has good contacts to make vinyl overlays for emblems , I did custom overlays for my Stinger wheel caps from a supplier in Poland of all places and they are perfect ,

 

[Razorback]

thats great , keep us posted . Sal has good contacts to make vinyl overlays for emblems , I did custom overlays for my Stinger wheel caps from a supplier in Poland of all places and they are perfect ,

This is what I was referring to in regards to just the T.

 

[westcoastTelly]

if the Telluride name ran through it , could look good , are you able to create ??

______________________________

 

[Razorback]

if the Telluride name ran through it , could look good , are you able to create ??

I am going to try to put something together this weekend with Adobe and will post here if I do. Telluride would run through the middle where the space is. I would need to check though and ensure there are no copyright infringements with the design.

 

[westcoastTelly]

I am going to try to put something together this weekend with Adobe and will post here if I do. Telluride would run through the middle where the space is. I would need to check though and ensure there are no copyright infringements with the design.

I wouldnt worry too much about copyright if we just want to make a few overlays , I took the GT logo from Kia for my Stinger GT

 

[Andymoney]

Anyone completely debadge yet. I really don't like the name telluride everywhere.

Telluride lettering is bolted on, on the rear. So taking the name off the back wouldn’t work. Prob did that on purpose

 

[westcoastTelly]

Telluride lettering is bolted on, on the rear. So taking the name off the back wouldn’t work. Prob did that on purpose

sometimes they have positioning pins and are adhered with 3m double side auto tape , but honestly I've never heard of lettering being bolted on . Most lettering is just stuck on using placement stencils ( BMW , Audi , MB etc ) someone will try to debadge and confirm I'm sure