Homelink Mirror

[BunchaMasseys]

The previous listed one on eBay is sold out. Anyone have any other sources?

 

[TranscendentalOctothorpe]

PN for that one that is now showing "0 stock" is GNTX-1124. If you just search eBay for that PN, you'll find several, many used for just $50, if you swing that way.

 

[jesskewl]

I def like the homelink mirror with built in compass. It looks a little more correct than the one that comes standard in SX Telly.

What does a standard SX telly mirror look like? Just homelink w/o the compass? So this is an upgrade to get the compass?

 

[dznyfan4778]

The previous listed one on eBay is sold out. Anyone have any other sources?

Amazon.com

______________________________

 

[Mrs.Telly]

Anyone know of a homelink mirror with more than 3 presets? I have an E and W gate to program in with different codes and 3 garage doors. Would like to program in all 5 so there is no small black devices hanging from my mirrors.

 

[bluedevil]

Howdy folks. This is a cool community.

I just drove my base-LX Telluride home, and immediately started the upgrades, so wanted to help out others here.

FYI, I bought one of these off of eBay. Ordered from here. Just $83 shipped.
Install was pretty easy. I literally spent more time reading up on it than doing it. I'd say it was 20min total. Keep in mind, this is a base LX, so no wiring harness already up at the mirror area. The instructions and harness that comes with this version says its for a Sorento, but used the instructions in this post, with some adjustments:
I didn't remove the A-pillar all the way, so no need to cut and replace the 1-time clips.
Those instructions only provide ignition-switched power (for the dimming and compass), but not the always-on HomeLink button power (the harness that comes with the mirror at that eBay link has 3 wires: switchedPower, alwaysPower, Gnd/neg). So I connected the other wire to a solid red on 2 connectors over on the fuse panel and it works like a charm. If anyone needs a pic, let me know.

So, to encourage anyone that is wondering: yes, it is really pretty easy to do this even if the wiring harness isn't there, and you still get the HomeLink power, and for just $83!

I'm pleased. Thanks to those here that try to help out!

I just started to install this mirror and bought the harness. I tapped the wires in the existing harness for the dimming mirror and while the dimming mirror works fine... I can't get the Homelink buttons to work. Any ideas?

 

[bluedevil]

Now I just purchased the homelink mirror to plug and play with my EX and again while the dimming mirror is fine... the Homelink buttons don't seem to respond. Do I need to add power or something to another part of the harness plug?