Windows not rolling up all of the way? Here's a fix...

[TellyBear23]

Reset Procedure​

1. Start your Telluride.
2. Close all the doors and windows.
3. Open the window by pressing and holding the window control switch. When the window is fully open, keep the switch pressed for a few seconds.
4. Close the window by lifting and holding the window control switch. When the window is fully closed, keep the switch held for a few seconds.

Note: Repeat the procedure if the window does not automatically close with one press of the switch. If it still doesn’t work, repeat the procedure without starting the engine and the ignition in ON position. To turn on the ignition in vehicles with start/stop button, press the button without pressing the brake pedal.

Reset Procedure 2​

If the above reset instructions do not work for your Telluride, then this alternate method may work.

1. Start your Telluride.
2. Close all windows and doors.
3. Open the window by pressing and holding the window control switch. When the window is fully open, keep the switch pressed for a few seconds. Release the switch, then press it again and hold it for a few seconds.
4. Close the window by lifting and holding the window control switch. When the window is fully closed, keep the switch held for a few seconds. Release the switch, then pull it upward again and hold it.
5. The one-touch up and down features will then be fully functional.

Note: If the window still doesn’t automatically close in your Telluride, repeat the procedure without starting the engine and the ignition in ON position. To turn on the ignition in vehicles with start/stop button, press the button without pressing the brake pedal.