2020 AWD With 38k miles. Last several months and getting worse there is a very noticeable binding or biting when turning left or right from a stop. A nice easy turn either direction and you can feel it. First I thought it was from the rear but the worse it gets it seems like it's from front and back. Going straight from a stop you don't feel it. I haven't found this issue anywhere online yet and of course the first time the dealer couldn't replicate it because they just did a few circles in their parking lot. I returned with it the next week and made a tech ride with me. He felt it and said yep there's an issue and he would call tech specialist at kia. It is scheduled to go in next week and I called ahead of time and of course Kia hasn't got back to them yet. Only thing that I seen was a close issue was a tsb with the Stingers where they were changing diff fluid and adding friction modifiers. To me it does seem like it could be a fluid issue. Anyone have similar problem?
I'm not an automotive technician, but the issue you're describing might be related to the drivetrain, specifically the differentials, given that you're experiencing the binding or biting feeling when turning left or right from a stop. In all-wheel-drive vehicles, differentials distribute power to the front and rear wheels, allowing them to turn at different speeds during turns. If there's a problem with the differential fluid or the mechanical parts, it can lead to the issues you're experiencing.
Friction modifiers in the differential fluid are designed to reduce the friction between the gears, so a lack of or degraded friction modifiers could potentially cause problems. That being said, a Technical Service Bulletin (TSB) for a different model might not be directly applicable to your situation, but it might provide some clues as to what could be wrong.
Here are some possibilities:
1. Differential Fluid: If it's been a while since the differential fluid has been changed, or if the vehicle is using improper or degraded fluid, that could lead to binding.
2. Transfer Case: Since it's an AWD vehicle, the transfer case is another component that might cause issues when turning.
3. CV Joints: The Constant Velocity (CV) joints allow the front wheels to receive power and steer at the same time. Worn or damaged CV joints can also cause a similar issue.
4. Wheel Bearings: Though less likely, worn wheel bearings could cause binding or grinding noises and sensations during turns.
Given that the technician felt the issue and agreed there is a problem, it's good that you have an appointment to get this looked into. They will likely run a series of diagnostic tests to isolate the problem and determine the appropriate solution. Make sure to share any insights or observations you've made, as they might help with the diagnosis.