Need help with measurements

[stevek]

I’m looking at getting a captain chair gap filler for my telluride that’s is arriving in a month but need someone with the captain chairs to get the following measurements for me

 

[stevek]

Bump

 

[Tellthemride]

Try any of the users that posted on the threads below.

After searching high and low for something to fill the space between our second row captains chairs, I decided to tackle making something myself. Sharing for fun.

I wanted the captains chairs when we ordered our Telluride. We love to road trip with our dog and her preferred spot is laying between our teens in the second row. I figured we could shove some pillows in there but ultimately I wanted something that looked more intentional. With some help from my woodworker dad, we made a plywood riser and I padded, covered and finished it with marine vinyl. It should be heavy enough to stay in place but for good measure we added two tabs to the back to keep it from sliding forward.

What other solutions has anyone seen to fill the gap?

9.25” wide in the gap at the thickest part of the seat bottom. About 22” from the ledge to the back of the seats. And in case you need it 9” clears the seat cushion in height.

I’m curious if you find anything. I was interested in doing the same.

I have an S. I’m not sure if the Nappa leather seats are wider.

Looking for solutions on what you can use in the cargo area to protect the second row captain’s chairs other then a dog gate. Is there anything on the market that fills the gap so our lab can’t come forward?

thanks..